CISCO2901-V/K9 Overview
The Cisco 2901 router, supporting voice module, is designed for small offices. CISCO2901-V/K9 bundles Voice bundle, the PVDM3-16 and UC License PAK.
Quick Specs
Figure 1 shows the appearance of the CISCO2901-V/k9.
Table 1 shows the Quick Specs of the CISCO2901-V/k9.
| Product Code | CISCO2901/k9 |
| Bundle | Voice Bundle |
| Rack Units | 1U |
| Interfaces | 2 integrated 10/100/1000 Ethernet ports |
| Expansion Slot(s) | 2 onboard digital signal processor (DSP) slots
4 enhanced high-speed WAN interface card slots 1 onboard Internal Service Module for application services |
| RAM | 512 MB (installed) / 2 GB (max) |
| Flash Memory | 256 MB (installed) / 8 GB (max) |
| Dimensions | 43.9 cm x 43.8 cm x 4.5 cm |
| Package Weight | 11.69 Kg |
Product Details
Figure 2 shows the front panel of the Cisco 2901 router with ports and LEDs.
Note:
| SYS | On/Off switch | ||
| ACT | AC power connector | ||
| POE |
Table 2 shows the LEDs area description
| LED | Color | Description |
| SYS | Solid green | Solid green indicates normal operation. |
| Blinking green | System is bootingis in ROM monitor mode. | |
| Amber | System error. | |
| Off | Power is offsystem board is faulty. | |
| ACT | Green | Solidblinking indicates packet activity between the forwarding and routing engine and any I/O port. |
| Off | No packet transfers are occurring. | |
| PoE | Green | PoE is available. |
| Amber | Power supply is not supplying PoE power. |
Figure 3 shows the back panel of the Cisco 2901 router with slots and ports.
Note:
| EHWIC 0,1,2 and 3 (0, far right) | USB 0 and 1 (1, top) | ||
| Compact flash 0 and 1 | AUX | ||
| USB serial port | 10/100/1000 Ethernet port (GE 0/0) | ||
| RJ-45 serial console port | Ground | ||
| 10/100/1000 Ethernet port (GE 0/1) |
Modularity Features
Table 3 shows some recommended models for this router.
| Models | Description |
|
HWIC-2T |
2-Port Serial WAN Interface Card Cisco Router High-Speed WAN Interface card |
|
EHWIC-1GE-SFP-CU |
Cisco 1900, 2900, 3900 Router EHWIC WAN Card vb EHWIC-1GE-SFP-CU |
|
EHWIC-4ESG |
Four port 10/100/1000 Base-TX Gigabit Ethernet switch interface card for Cisco 1900 2900 3900 Routers |
|
ISM-SRE-300-K9 |
Internal Services Module (ISM) with Services Ready Engine |
|
MEM-CF-256U1GB |
256MB to 1GB Compact Flash Upgrade for Cisco 1900,2900,3900 |
|
MEM-CF-256U2GB |
256MB to 2GB Compact Flash Upgrade for Cisco 1900,2900,3900 |
|
MEM-CF-256U512MB |
256MB to 512MB CF Upgrade for Cisco 1900,2900,3900 ISR |
|
MEM-CF-256U4GB |
256MB to 4GB Compact Flash Upgrade for Cisco 1900,2900,3900 |
|
MEMUSB-1024FT |
1GB USB Flash Token |
Compare to Similar Routers
Table 5 shows the comparison between CISCO2901/K9 and CISCO2901-V/K9.
| Model |
CISCO2901/K9 |
CISCO2901-V/K9 |
| Bundle | None | Voice Bundle |
| Interface | 2GE | 2GE |
| EHWIC slot | 4 | 4 |
| SIM Slot | 0 | 0 |
| SFP | 0 | 0 |
| Memory | 512MB
(installed) / 2 GB (max) |
512MB
(installed) / 2 GB (max) |
| Flash Memory | 256 MB (installed) / 8 GB (max) | 256 MB (installed) / 8 GB (max) |
| Rack Unit | 1U | 1U |
Get more information
Do you have any question about the CISCO2901-V/K9
Contact us now
orders@netseg.me.




Reviews
There are no reviews yet.