Overview

ES1D2SRUH000 Overview

ES1D2SRUH000 is the Huawei S7706/S7712 Main Control Unit. The ES1D2SRUH000 can be installed in: Slots 07 and 08 in an S7706 chassis, Slots 13 and 14 in an S7712 chassis.

Quick Specs

Figure 1 shows the appearance of ES1D2SRUH000.

Table 1 shows the Quick Specs.

Part Number	ES1D2SRUH000
Basic functions	Huawei S7706/S7712 Main Control Unit
Memory	4 GB
Flash	64 MB
eUSB card	2 GB
Physical specifications	Dimensions (W x D x H): 394.7 mm x 426.8 mm x 35.1 mm (15.5 in. x 16.8 in. x 1.4 in.) Reserved subcard slot: 243.7 mm x 170.0 mm x 35.1 mm (15.5 in. x 6.7 in. x 1.4 in.) Weight: 3.46 kg (7.63 lb) Maximum power consumption: 183 W (including subcards)

Product Details

Figure 2 shows the ES1D2SRUH000 front ports.

Note:

	One subcard slot. A subcard for the main control unit can be installed in this slot.
	Two GE ports (reserved).
	One USB port. It is used to load software from a USB flash drive.
	One console port. It can connect to a configuration terminal to implement onsite configuration of the S7700.
	One ETH management port (10/100BASE-TX auto-sensing). It can connect to a network port of a configuration terminal or network management workstation to set up a local or remote configuration environment.

Get more information

Do you have any question about the ES1D2SRUH000

Live Chat or sales@netseg.me.

Be the first to review “ES1D2SRUH000”

Reviews

There are no reviews yet.

Customer Reviews

(0)

5 stars

4 stars

3 stars

2 stars

1 stars

No reviews yet.

ES1D2SRUH000 Specification

ES1D2SRUH000 Specification
Basic functions	The ES1D2SRUH000 is the system control and management unit for the S7712 and S7706. It integrates the main control unit, switching unit, and system maintenance unit.
Distributed forwarding	Performs concurrent data forwarding using a distributed data plane.
Memory	4 GB
Flash	64 MB
eUSB card	2 GB The system configuration data, startup files, system software package, and system logs are saved in the eUSB card by default.
CSS	The ES1D2SRUH000 can have the ES1D2VS04000 installed to support the CSS function in V200R009C00 and later versions.
OAM	The ES1D2SRUH000 can have ES0D00FSUA00 installed to provide enhanced services such as Operation, Administration and Maintenance (OAM) and Bidirectional Forwarding Detection (BFD). 802.1ag: identifies, detects, and sends continuity check (CC) packets. Multiprotocol Label Switching (MPLS OAM): identifies, detects, and sends MPLS OAM packets. OAM UNCFG_MEP.
Redundancy backup	Supported Main control board is mandatory for switches. Each switch must be configured with one or two main control boards. When one main control board is configured for a switch, the main control board can be installed in either main control board slot of the switch. When two main control boards are configured, the two main control boards work in hot standby mode to improve reliability of the switch. The active and standby main control boards monitor the status of each other. If the active main control board fails, the standby main control board automatically becomes active to ensure uninterrupted services.
Hot swap	Supported Before removing the active ES1D2SRUH000, perform an active/standby switchover.
Physical specifications	Dimensions (W x D x H): 394.7 mm x 426.8 mm x 35.1 mm (15.5 in. x 16.8 in. x 1.4 in.) Reserved subcard slot: 243.7 mm x 170.0 mm x 35.1 mm (15.5 in. x 6.7 in. x 1.4 in.) Weight: 3.46 kg (7.63 lb) Maximum power consumption: 183 W (including subcards)
Environment parameters	Operating temperature: 0C to 45C (32F to 113F) Operating relative humidity: 5% RH to 95% RH (noncondensing) Storage temperature: -40C to +70C (-40F to +158F) Storage relative humidity: 5% RH to 95% RH (noncondensing)
EMC compliance	CISPR22 Class A CISPR24 EN55022 Class A EN50024 ETSI EN 300 386 Class A CFR 47 FCC Part 15 Class A ICES 003 Class A AS/NZS CISPR22 Class A VCCI Class A IEC61000-6-2 IEC61000-6-4 IEC61000-4-2 ITU-T K 20 ITU-T K 21 ITU-T K 44 CNS13438 CLASS A KN 22 CLASS A
Environmental standards compliance	RoHS REACH WEEE
Safety standards compliance	IEC 60950-1 EN 60950-1 UL 60950-1 CSA C22.2 No 60950-1 AS/NZS 60950.1 BS EN 60950-1