Lenovo ThinkSystem SR630 V4 Server

Combining performance and flexibility, the SR630 V4 server is a great choice for enterprises of all sizes. The server offers a broad selection of drive and slot configurations and offers numerous high performance features. Outstanding reliability, availability, and serviceability (RAS) and high-efficiency design can improve your business environment and can help save operational costs.

Scalability and performance

The ThinkSystem SR630 V4 offers numerous features to boost performance, improve scalability and reduce costs:

• Supports one or two Intel Xeon 6700-series or 6500-series processors with Performance-cores (P-cores)
  • Up to 86 cores and 172 threads
  • Core speeds of up to 4 GHz
  • TDP ratings of up to 350 W
• Supports one or two Intel Xeon 6700-series processors with Efficient-cores (E-cores)
  • Up to 144 cores
  • Core speeds of up to 2.4 GHz
  • TDP ratings of up to 330 W
• Support for DDR5 memory DIMMs to maximize the performance of the memory subsystem:
  • Up to 32 DDR5 memory DIMMs, 16 DIMMs per processor
  • 8 memory channels per processor (2 DIMMs per channel)
  • Supports 1 DIMM per channel operating at 6400 MHz
  • Supports 2 DIMMs per channel operating at 5200 MHz
  • Using 256GB 3D RDIMMs, the server supports up to 8TB of system memory
• Support for MRDIMMs for increased memory bandwidth with memory bus speeds of up to 8000 MHz. MRDIMMs require Intel Xeon 6700P-series processors.
• Support for Compute Express Link (CXL) memory DIMMs in an E3.S 2T form factor. With CXL 2.0 for next-generation workloads, you can reduce compute latency in the data center and lower TCO. CXL is a protocol that runs across the standard PCIe physical layer and can support both standard PCIe devices as well as CXL devices on the same link. CXL memory requires Intel Xeon 6700P-series processors.
• Support for up to three single-width GPUs, each up to 75W for substantial processing power in a 1U system.
• Supports up to 12x 2.5-inch NVMe hot-swap drive bays, by using combinations of front-accessible (up to 10 bays) and rear-accessible (2 bays).
• Support for up to 16x E3.S 1T NVMe drives, a new form factor drive for high-density and high-performance storage.
• Supports up to 16x NVMe drives without oversubscription of PCIe lanes (1:1 connectivity) and without the need for additional NVMe adapters. The use of NVMe drives maximizes drive I/O performance, in terms of throughput and latency.
• Supports 12x SAS drives using a variety of 12Gb RAID controllers and SAS HBAs.
• Supports high-speed RAID controllers providing 12 Gb SAS connectivity to the drive backplanes. A variety of PCIe 3.0 and PCIe 4.0 RAID adapters are available.
• Supports M.2 drives for convenient operating system boot functions. M.2 drives can be internally mounted or can be mounted at the front or rear of the server as hot-swap drives. Optional RAID-0 or RAID-1.
• Supports up to 3x PCIe slots at the rear of the server. Also supports 2x OCP slots at the rear of the server.
• The server has up to two dedicated industry-standard OCP 3.0 slots supporting a variety of Ethernet network adapters. A simple-swap mechanism with a thumbscrew and pull-tab enables tool-less installation and removal of the adapter. The adapter supports shared BMC network sideband connectivity to enable out-of-band systems management.
• The server offers PCI Express 5.0 I/O expansion capabilities that doubles the theoretical maximum bandwidth of PCIe 4.0 (32GT/s in each direction for PCIe Gen 5, compared to 16 GT/s with PCIe Gen 4 and 8 GT/s with PCIe Gen 3). A PCIe 5.0 x16 slot provides 128 GB/s bandwidth, enough to support a dual-port 200GbE network connection or a single-port 400GbE connection.