LS-S5352C-PWR-EI

LS-S5352C-PWR-EI Specification

Fixed port

48 10/100/1000Base-T ports 

Extended slot

Two extended slots

MAC address table

IEEE 802.1d compliance

32K MAC

MAC address learning and aging

Static, dynamic, and blackhole MAC address entries

Packet filtering based on source MAC addresses

VLAN

4K VLANs

Guest VLAN and voice VLAN

VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports

1:1 and N:1 VLAN mapping

Ring protection

RRPP ring topology and RRPP multi-instance

Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover

Smart Ethernet Protection (SEP),G.8032 Ethernet Ring Protection Switching (ERPS)

STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)

BPDU protection, root protection, and loop protection; BPDU tunnel

E-Trunk

IP routing

Static routing, OSPF, OSPF v3, IS-IS, IS-ISv6, BGP, BGP 4+, and ECMP

IPv6 features

Neighbor Discovery (ND)

Path maximum transmission unit (PMTU)

IPv6 Ping, IPv6 Tracert, and IPv6 Telnet

6 to4 tunnel, ISATAP tunnel, and manually configur ed tunnel

ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports, or protocol types

Multicast Listener Discovery (MLD) v1/v2 snooping

Multicast forwarding

IGMP v1/v2/v3 snooping and IGMP fast leave

Multicast forwarding in a VLAN and multicast replication between VLANs

Multicast load balancing among member ports of a trunk

Controllable multicast

Port-based multicast traffic statistics 

IGMP v1/v2/v3, PIM-SM, PIM-DM, and PIM-SSM

MSDP

QoS/ACL

Rate limiting on packets sent and received by an interface

Packet redirection

Port-based traffic policing and two-rate three-color CAR

Eight queues on each port

WRR, DRR, PQ, WRR+PQ, and DRR+PQ queue scheduling algorithms

Re-marking of the 802.1p priority and DSCP priority

Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, 
destination MAC address, source IP address, destination IP address, port number,protocol type, and VLAN I

Rate limiting in each queue and traffic shaping on ports

Security
features

User privilege management and password protection

DoS attack defense, ARP attack defense, and ICMP attack defense

Binding of the IP address, MAC address, interface, and VLAN

Port isolation, port security, and sticky MAC

Blackhole MAC address entries

Limit on the number of learned MAC addresses

802.1x authentication and limit on the number of users on an interface

AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC

SSH v2.0

Hypertext Transfer Protocol Secure (HTTPS)

CPU defense, Blacklist and whitelist

Reliability

RRPP ring topology and RRPP multi-instance

Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover

SEP

ERPS(G.8032 v2)

STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s)

BPDU protection, root protection, and loop protection

E-Trunk

Management
and
Maintenance

iStack

MAC Forced Forwarding (MFF)

Virtual cable test

Port mirroring and RSPAN (remote port mirroring)

Remote configuration and maintenance by using Telnet

SNMP v1/v2c/v3

RMON

Web NMS

Easy Operation

System logs and alarms of different levels

GVRP, MUX VLAN

sFlow

Operating environment

Operating temperature: 0 O C50 O C (long term); -5 O C55 O C (short term)
Relative humidity: 10%90% (non-condensing)

Input voltage

AC:
Rated voltage range: 100 V to 240 V AC, 50/60 Hz
Maximum voltage range: 90 V to 264 V AC, 50/60 Hz
DC:
Rated voltage range: 48 V to 60 V, DC
Maximum voltage range: 36 V to 72 V, DC

Dimensions (mm)

442 (W) x 420 (D)x 43.6 (H)

Typical power
consumption

Non-PoE: < 88 W

PoE: < 930 W(PoE power: 740 W)