Select Right Cisco Switches

Cisco provides Catalyst 9300, Catalyst 9200, Nexus series and more switches for all-size business needs.

Catalyst 9300

Catalyst 9200

Switch Selector

Cisco Switches vs. Huawei Switches

All Switches

Learn Details

PWR-C45-6000ACV Overview

PWR-C45-6000ACV is a Cisco Catalyst Switch 4500 Series Switch Power Supply, delivering 6000W AC power (Data and PoE) for Cisco 4500 switches. Notice that PWR-C45-6000ACV is similar with PWR-C45-6000ACV, except that PWR-C45-6000ACV is a spare one.

Quick Spec

Table 1.

Product Code	PWR-C45-6000ACV
Manufacturer	Cisco System Inc.
Product Type	Power Supply Module
Compatible product	Cisco Catalyst 4500-E Series Switches and classic chassis
Power Input	2800W Data and 4200W PoE Power
Auto-Sensing	110V (15A) / 220V (20A)
Redundancy	Dual input power supply for additional redundancy
Rated MTBF (Hours)	341,356

Product Details

Figure 1. PWR-C45-6000ACV can be installed in the Catalyst 4500 switch Chassis.

Compatible Products

Table 2. Recommended Compatible Switches.

Model	Description
WS-C4503-E	Cat4500 E-Series 3-Slot Chassis, fan, no ps
WS-C4507R-E	Cat4500 E-Series 7-Slot Chassis, fan, no ps, Red Sup Capable
WS-C4510R-E	Cat4500 E-Series 10-Slot Chassis, fan, no ps,Red Sup Capable
WS-C4507R+E	Catalyst 4500E 7 slot chassis for 48Gbps/slot – Supervisor Engine redundancy – Power redundancy
WS-C4506-E	Catalyst 4500 E-Series 6-Slot Chassis, fan, no ps

Compare to Similar Item

Table 3. Comparison of similar item.

Product Code	PWR-C45-6000ACV	PWR-C45-4200ACV
Manufacturer	Cisco System Inc.	Cisco System Inc.
Product Type	Power Supply Module	Power Supply Module
Compatible product	Cisco Catalyst 4500-E Series Switches and classic chassis	Cisco Catalyst 4500-E Series Switches and classic chassis
Power Input	2800W Data and 4200W PoE Power	4200W AC dual input
Rated MTBF (Hours)	341,356	331,945

Get more information

Do you have any question about the PWR-C45-6000ACV

Live Chat or sales@netseg.me.

Be the first to review “PWR-C45-6000ACV”

Reviews

There are no reviews yet.

Customer Reviews

(0)

5 stars

4 stars

3 stars

2 stars

1 stars

No reviews yet.

PWR-C45-6000ACV Specification

PWR-C45-6000ACV Specification
AC-input type	Autoranging inputs with power factor correction Note Power factor correction is a standard feature on all Catalyst 4500 E-series AC-input power supplies. PFC reduces the reactive component in the source AC current allowing higher power factors (typically 99 percent or better) and lower harmonic current components.
AC-input voltage	Low-line (120 VAC nominal)85 VAC (min) to 132 VAC (max) High-line (230 VAC nominal)170 VAC (min) to 264 VAC (max)
AC-input current	12 A (max) @ 120 VAC (for each input) 16 A (max) @ 230 VAC (for each input)
AC-input frequency	50/60 Hz (nominal) (3% for full range)
Power supply output	Total output depends on the number of inputs connected and the source AC voltage. If two inputs are used, they should both be of the same AC voltage. 1050 W operation (with one 120 VAC nominal input) 70.8 A @ 12 VDC (data only) 12.5 A @ 3.3 VDC (data only) 18.4 A @ 50 VDC (PoE if used) 2100 W operation (with two 120 VAC nominal inputs) 141.6 A @ 12 VDC (data only) 12.5 A @ 3.3 VDC (data only) 37.0 A @ 50 VDC (PoE if used) 3000 W operation (with one 230 VAC nominal input) 183.3 A @ 12 VDC (data only) 12.5 A @ 3.3 VDC (data only) 48 A @ 50 VDC (PoE if used) 6000 W operation (with two 230 VAC nominal inputs) 183.3 A @ 12 VDC (data only) 12.5 A @ 3.3 VDC (data only) 96 A @ 50 VDC (PoE if used)
Power supply output capacity	6000 W maximum
Output holdup time	20 ms minimum
kVA rating 5	6.8 kVA (power factor = 0.99)
Heat dissipation	2,720 BTUs/hr (approx.)
Minimum software requirement	Cisco IOS Release 12.2(52)SG
Power over Ethernet	Supported, up to 4800 W
LEDs and Meanings
INPUT OK	GreenSource AC voltage is OK. (Input voltage is 85 VAC or greater.) OffSource AC voltage falls below 70 VAC, is not present, or the power supply is turned off.
FAN OK	GreenPower supply fan is operating properly. OffPower supply fan failure is detected.
OUTPUT FAIL	RedProblem with one or more of the DC-output voltages of the power supply is detected. OffDC-output voltage with acceptable margins. Note For proper operation of the OUTPUT FAIL LED, systems with single power supplies must be configured with a minimum of one fan tray assembly and one supervisor engine. Systems with dual power supplies must have a minimum configuration of one fan tray assembly, one supervisor engine, and one additional module. Failure to meet these minimum configuration requirements can cause a false power supply output fail signal.