ET1BS12712S0
Roll over image to zoom in
Click to open expanded view

ET1BS12712S0

Call for Price

Call For Price

Availability: In stock

Get A Quote
Category:

Warranty : Warranty Icon

Shipping : Shipping Icon Fast & Secure

Payments : Payment Methods

Certification : Certifications

ET1BS12712S0 Overview

ET1BS12712S0 is the Huawei S12712 Switch assembly chassis, including 12 slots.

Quick Specs

Product Code ET1BS12712S0
Packet Forwarding Rates 9,120 Mpps; 12,960 Mpps(With Necessary Plug-ins)
Switching Capacity 17.44 Tbit/s; 44.96 Tbit/s(With Necessary Plug-ins)
MPU Slots 2
SFU Slots 4
Service Card Slots 12
Energy Saving Energy Efficient Ethernet (802.3az)
Redundancy Design MPUs, SFUs, power supplies, and fan modules
Maximum Power Consumption of the Entire Equipment ≤ 6,600W
Dimensions (W x D x H) With cable management frames: 442 mm x 585 mm x 841.75 mm (17.4 in. x 23.0 in. x 33.1 in. (19 U))

Without cable management frames: 442 mm x 489 mm x 841.75 mm (17.4 in. x 19.3 in. x 33.1 in. (19 U))
Weight 63 kg

 

① Two MPUs
② Twelve service cards, including:

·Open Service Platform Unit
·1000M Interface Card
·GE/10GE Interface Card
·10GE Interface Card
·40GE Interface Card
·100GE Interface Card
③ Four SFUs
④ A pair of mounting brackets
⑤ Six power modules
⑥ Two CMUs
⑦ Front ESD jack
⑧ Cable management frames

·The ET1BS12712S0 is just a Chassis that it doesn’t provide cards, modules or units. The cards, modules or units must be purchased separately.
·The mounting brackets are used to secure the chassis in a cabinet.
·The ground terminal of an ESD wrist strap can be inserted in this jack. The ESD wrist strap can provide ESD protection when the chassis is reliably grounded.
·The cable management frames separate cables on different cards and help route cables orderly.

Be the first to review “ET1BS12712S0”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Customer Reviews

(0)
5 stars
4 stars
3 stars
2 stars
1 stars

No reviews yet.

×

Write a Review

☆ ☆ ☆ ☆ ☆

ET1BS12712S0 Specification
Switching Capacity 17.44 Tbit/s; 44.96 Tbit/s
Packet Forwarding Rates 9,120 Mpps; 12,960 Mpps
MPU Slots 2
SFU Slots 4
Service Card Slots 12
Redundancy Design MPUs, SFUs, power supplies, and fan modules
CSS2 1+N backup of MPUs in a cluster
Up to 1.92 Tbit/s cluster bandwidth, 4 μs inter-chassis transmission latency
Wireless Network Management Native AC
AP access control, AP region management, and AP profile management
Radio profile management, uniform static configuration, and centralized dynamic management
Basic WLAN services, QoS, security, and user management
User Management Unified user management
802.1x, MAC, and Portal authentication
Traffic- and time-based accounting
User authorization based on user groups, domains, and time ranges
iPCA Quality Awareness Marking real service packets to obtain real-time count of dropped packets and packet loss ratio
Counting number of dropped packets and packet loss ratio on devices and L2/L3 networks
SVF2.0 Virtualization Up to 4K clients (access switches and APs) virtualized into a single device
Two layers of ASs allowed in an SVF system
Third-party devices allowed between SVF parent and clients
VLAN Access, trunk, and hybrid interface types, auto-negotiation of LNP links
Default VLAN
VLAN switching
QinQ and selective QinQ
MAC address-based VLAN assignment
ARP 256K ARP entries
MAC Address 1M MAC address entries
Dynamic MAC address learning and aging
Static, dynamic, and blackhole MAC address entries
Source MAC address filtering
MAC address limiting based on ports and VLANs
Ring Network Protection Spanning Tree Protocol (STP) (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)
SEP
Bridge Protocol Data Unit (BPDU), root protection, and loop protection
BPDU tunnel
G.8032 Ethernet Ring Protection Switching (ERPS)
IP Routing 3M IPv4 routing entries
512K IPv6 routing entries
IPv4 dynamic routing protocols, such as RIP, OSPF, IS-IS, and BGP
IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+
Multicast 128,000 multicast routing entries
IGMP v1/v2/v3 and IGMP v1/v2/v3 snooping
PIM-DM, PIM-SM, and PIM-SSM
Multicast Source Discovery Protocol (MSDP) and Multiprotocol Extensions for BGP (MBGP)
Fast leave
Multicast traffic control
Multicast querier
Multicast protocol packet suppression
Multicast Call Admission Control (CAC)
Multicast ACL
MPLS Basic MPLS functions
MPLS Operations, Administration, and Maintenance (OAM)
MPLS Traffic Engineering (TE)
MPLS VPN/VLL/VPLS
Reliability Link Aggregation Control Protocol (LACP) and E-Trunk
Virtual Router Redundancy Protocol (VRRP) and Bi-directional Forwarding Detection (BFD) for VRRP
BFD for BGP/IS-IS/OSPF/static route
Non-Stop Routing (NSR), Non-Stop Forwarding (NSF) and Graceful Restart (GR) for BGP/IS-IS/OSPF/LDP
TE Fast ReRoute (FRR) and IP FRR
Eth-OAM 802.3ah and 802.1ag (hardware-based)
HSR
ITU-Y.1731
Device Link Detection Protocol (DLDP)
QoS 256K ACLs
Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority
ACLs and actions such as Committed Access Rate (CAR), re-marking, and scheduling
Queuing algorithms, such as SP, WRR, DRR, SP + WRR, and SP + DRR
Congestion avoidance mechanisms, including (WRED) and tail drop
H-QoS
Traffic shaping
Network Synchronization Ethernet synchronization
1588v2
Configuration and Maintenance Terminal access services such as console port login, Telnet, and SSH
Network management protocols, such as SNMP v1/v2/v3
File uploading and downloading through FTP and TFTP
BootROM upgrade and remote in-service upgrade
Hot patches
User operation logs
Security and Management MAC address, Portal, 802.1x, and Dynamic Host Configuration Protocol (DHCP) snooping triggered authentication
MACsec
RADIUS and HWTACACS authentication for login users
Command line authority control based on user levels, preventing unauthorized users from using command configurations
Defense against DoS attacks, Transmission Control Protocol (TCP) SYN Flood attacks, User Datagram Protocol (UDP) Flood attacks, broadcast storms, and heavy traffic attacks
Remote Network Monitoring (RMON)
Security Protection* Firewall
Network Address Translation (NAT)
IPSec, SSL VPN
Intrusion Protection System (IPS)
Load balancing Analog Digital Conversion (ADC)
Interoperability Interoperable with VBST (compatible with PVST/PVST+/RPVST)
Interoperable with LNP (similar to DTP)
Interoperable with VCMP (similar to VTP)
Energy Saving Energy Efficient Ethernet (802.3az)
Dimensions (H x W x D) 841.75 mm x 442 mm x 489 mm, 19U
Weight (empty chassis) 63 kg
Operating Voltage DC: –40V to –72V AC: 90V to 290V
Maximum Power Consumption of the Entire Equipment ≤ 6,600W

Related products

Categories